Sony UP-DP10 Operating Instructions / Mode d’emploi - Page 14
Preparing to Print, Preparing a Print Pack - digital photo
View all Sony UP-DP10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Preparing to Print Preparing a Print Pack In order to print, it is necessary to prepare a Sony Print Pack (printing paper and an ink ribbon cartridge, sold as a set). A Sony Print Pack must be purchased separately. The following table lists the types of Sony Print Packs available. Product No. Type Size/number of sheets Features UPC10P23 Photocards 100 × 180 mm (100 × 152 mm after cutting) 25 sheets These sheets produce prints that have no white border when photos taken with a digital camera that has a 2:3 aspect ratio (V:H) are printed on these sheets and the border is then cut off along the perforations. UPC10P34 Photocards 100 × 180 mm (100 × 134 mm after cutting) 25 sheets These sheets produce prints that have no white border when photos taken with a digital camera that has a 3:4 aspect ratio (V:H) are printed on these sheets and the border is then cut off along the perforations. UPC- Glossy 100 × 180 mm 10S01 photostickers 25 sheets These sheets have no perforations, and are backed with an adhesive. The maximum printing area is 100 × 155 mm. Note If "Border" is selected in the printer driver, each of the print sizes will be reduced somewhat. Notes on Using Print Packs • The ink ribbon cartridge is designed to allow you to print an image on each of the sheets in the Print Pack. • If photos taken with a digital camera that has a 3:4 aspect ratio (V:H) are printed on the paper in a UPC-10P23 Print Pack, a white border may remain even after cutting along the left and right perforations, or a portion of the top and bottom of the image may not be printed on the paper. 14