Sony VGP-XL1B User Guide - Page 16
Installing VGP-XL1B, Step 1: Before You Begin - changer software cd
View all Sony VGP-XL1B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installing VGP-XL1B The installation process consists of the following steps. Step 1 Step 2 Step 3 Review the section titled Before You Begin. Install the Changer Software CD on the host computer. Connect the VGP-XL1B to the host computer. Step 1: Before You Begin Before connecting your VGP-XL1B CD/DVD Changer/Recorder to the host computer, consider the environment in which it will be placed. Listed below are some general guidelines. • Do not set up the VGP-XL1B in the following locations: - in direct sunlight - near a magnet or a item that generates a magnetic field - areas with high heat, such as near a heater - areas with excessive heat, dust, and humidity - areas with poor ventilation Please observe the following items to avoid damage. • Always turn off the power before the Changer/Recorder is moved. Damage may be caused to the changer if the device is transferred or moved with the power on. • Do not move the Changer/Recorder if there are discs inside the carousel. Remove all discs from the changer before moving. • Do not tip or hit this device. Even a slight vibration or small impact may cause a disc to come loose or cause damage to the discs or carousel. • Do not set up where it is not physically secure. • Do not obstruct the ventilation holes or place heavy objects on top of the device. • If the host computer and the Changer/Recorder are placed in an enclosed cabinet, make sure there is sufficient airflow. 10 VGP-XL1B User Guide