Sony VGP-XL1B User Guide - Page 45

The Changer carousel will not spin., interrupt the current process running on the Changer drive.

Get Sony VGP-XL1B - Vaio Digital Living System Media Changer PDF manuals and user guides View all Sony VGP-XL1B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Event: Working with 1394 ports. Comment: • The changer come with two i.LINK® ports. One port is used for connecting to a host computer. The other port can be used to connect/daisy-chain additional changers. Note: Sony only supports connecting four additional changers (for a total of five). • Do not connect a 1394 device on the second port of the changer while the changer is in use. • Once a new 1394 device is plugged into a second i.LINK® port of the VGP-XL1B, both the host computer and the second 1394 device are re-enumerated by the operating system. This could interrupt the current process running on the Changer drive. Event: The Changer carousel will not spin. Comment: Reset the power to the Changer. Turn the power off and wait approximately 6 seconds, then turn the power on. The carousel should spin one turn every time the power is reset. Event: System locks up or freezes after plugging in and/or unplugging the Changer. Comment: Do not unplug or plug in the Changer while the Changer and system are on. VGP-XL1B User Guide 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
VGP-XL1B User Guide
39
Event:
Working with 1394 ports.
Comment:
•
The changer come with two i.LINK
®
ports. One port is used for
connecting to a host computer. The other port can be used to
connect/daisy-chain additional changers. Note: Sony only sup-
ports connecting four additional changers (for a total of five).
•
Do not connect a 1394 device on the second port of the
changer while the changer is in use.
•
Once a new 1394 device is plugged into a second i.LINK
®
port
of the VGP-XL1B, both the host computer and the second 1394
device are re-enumerated by the operating system. This could
interrupt the current process running on the Changer drive.
Event:
The Changer carousel will not spin.
Comment:
Reset the power to the Changer. Turn the power off and wait
approximately 6 seconds, then turn the power on. The carousel
should spin one turn every time the power is reset.
Event:
System locks up or freezes after plugging in and/or unplugging the
Changer.
Comment:
Do not unplug or plug in the Changer while the Changer and sys-
tem are on.