Sony VPL-EX275 Operating Instructions - Page 17
signal is input from a computer APA Auto Pixel Alignment, Displaying a pattern
View all Sony VPL-EX275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Projecting/Adjusting an Image Correcting trapezoidal distortion of the projected image (Keystone feature) Normally the Keystone feature automatically adjusts the projected image. The Keystone feature may not work automatically if the screen is tilted. In this case, set Keystone manually. 1 Press the KEYSTONE key on the remote commander or select V Keystone in the Installation menu. 2 Use the V/v/B/b keys to set the value. The higher the value, narrower the top of the projected image. The lower the value, the narrower the bottom. Increase the number towards plus Note Since the Keystone adjustment is an electronic correction, the image may be deteriorated. Increase the number towards minus Displaying a pattern You can display a pattern for adjusting the projected image or a grid pattern with the PATTERN key on the remote commander. Press the PATTERN key again to restore the previous image. You can use a grid pattern as a guide to write text or to draw lines and shapes on the whiteboard or blackboard without using a computer. Note You cannot use this key when "Type A USB", "Type B USB" or "Network" is selected as the input. Automatically adjusts Phase, Pitch and Shift of projected image while a signal is input from a computer (APA (Auto Pixel Alignment)) Press the APA key on the remote commander. Press again to cancel adjusting during the setting. You can also set APA in the Screen Menu (page 22). If Smart APA in the Function menu is set to "On", executes APA automatically when a signal is input (page 25). Projecting an Image 17