Sony VPL-EX275 Operating Instructions - Page 33

Using the e-mail report Function Set the e-mail report function on the Setup page. Entered values will not be applied unless you click on [Apply]. 1 Click on [Owner information] to enter the owner information recorded in the e-mail report. Mail Report button 2 3 4 Network 6 5 Owner information button 1 2 Set the timing of the e-mail report. Click on [Mail Report] to open the Mail Report page. Lamp Reminder (Lamp1): Set the timing of the email report for lamp replacement. To reset Lamp Reminder, execute "Lamp Timer Reset" on the projector (page 25). Maintenance Reminder: Set the timing of the email report for maintenance. To reset Maintenance Reminder, check the RESET check box and then click on [Apply]. 3 Enter the outgoing e-mail address in the Email Address box then check the Report Timing check box of the e-mail report to be sent. 4 Set the mail account for sending e- mail reports. Mail Address: Enter the e-mail address. Outgoing Mail Server (SMTP): Enter the address of outgoing mail server (SMTP). Required Authentication: Check this check box if authentication is required for sending e-mail. Requires the use of POP Authentication before sending email (POP before SMTP): Check this check box to arrange for POP authentication to be performed before sending e-mail. Incoming Mail Server (POP3): Enter the address of the incoming-mail server (POP3) to be used for POP authentication. Account Name: Enter the mail account name. Password: Enter the password. Using Network Features 33