Sony VPL-EX275 Operating Instructions - Page 9
Preparation, Connecting the Projector, Connecting a Computer
View all Sony VPL-EX275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Preparation B Preparation Connecting the Projector Notes • Make sure all the equipment is powered off when connecting the projector. • Use the proper cables for each connection. • Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself. • For more information, refer also to the instruction manuals of the equipment you are connecting. • Use a no-resistance audio cable. Connecting a Computer Connection with a computer is explained for each input signal. INPUT A/INPUT B For connecting a computer with an RGB output connector. Mini D-sub 15-pin cable (supplied) Computer RGB output connector Audio output connector Audio cable (Stereo mini plug) (not supplied) Notes • The audio input connector is available only on VPL-EW275/EW245/EW225/EX275/EX245/ EX225. • It is recommended that you set the resolution of your computer to 1280 × 800 pixels (VPL-EW275/ EW245/EW225) or 1024 × 768 pixels (VPL-EX275/EX271/EX245/EX241/EX225/EX221) for the external monitor. INPUT C For connecting a computer with an HDMI output connector. HDMI cable (not supplied) Computer HDMI output connector Connecting the Projector 9