Sony VPL EX7 Operating Instructions - Page 34
Lamp off, Standby, TEXT4, Turns off the Closed Captions CC function. - lamp for
UPC - 027242761933
View all Sony VPL EX7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Setting items Power Saving Panel Key Lock CC Display Lamp Timer Reset Functions Initial setting Selects the Power Saving mode. Off • Lamp off: The lamp goes off if no signal is input for 10 minutes. The lamp lights again when a signal is input or any key is pressed. • Standby: The projector goes into Standby mode if no signal is input for 10 minutes. To use it, turn on the power again. • Off: The projector does not go into Power Saving mode. Locks all the control panel keys on the top panel of the Off projector so that the projector can be operated only with the Remote Commander. To lock the control panel keys, set to "On." When it is set to "On," keeping the ?/1 key on the control panel pressed for 10 seconds turns the projector on when it is in standby mode, and turns the projector to standby mode when the power is on. If you press and hold the MENU key for about 10 seconds when the power is on, the lock will be released and "Panel Key Lock" is automatically set to "Off." Turns on or off the Closed Captions (CC) function. Off • Off: Turns off the Closed Captions (CC) function. • CC1/CC2/CC3/CC4/TEXT1/TEXT2/TEXT3/ TEXT4: Selects a displayed version of the dialogue or sound channel of a program. When replacing the lamps, reset the lamp timer. - Notes • Press the APA key when the full image is displayed on the screen. If the projected image includes a black portion around it, the APA function will not work properly and some parts of the image may not be displayed on the screen. - You can cancel the adjustment by pressing the APA key again while "Adjusting" appears on the screen. - The picture may not be adjusted properly depending on the type of input signal. - Adjust the "Dot Phase," "H Size," and "Shift" items on the INPUT SETTING menu when you adjust the picture manually. • If the input signal is not displayed correctly when the input A signal classifying is set to "Auto", set it to conform the input signal. • Closed Captioning is not displayed in the following cases: - while you are adjusting the volume with VOLUME +/- on the remote commander - while you are operating on-screen menus - while "Please replace the Lamp." is displayed on the screen 34 The SET SETTING Menu