Sony VPL EX7 Operating Instructions - Page 48

General, Optional accessories, Some of the items may not be available in, some areas. For details - vpl ex70 specification

Page 48 highlights

R: 0.7 Vp-p ±2 dB (75 ohms terminated) G: 0.7 Vp-p ±2 dB (75 ohms terminated) B: 0.7 Vp-p ±2 dB (75 ohms terminated) HD: Horizontal sync input: TTL level, Positive/negative VD: Vertical sync input: TTL level, positive/negative AUDIO INPUT Stereo minijack, 500 mVrms, input impedance 47 Kilohms or more OUTPUT MONITOR OUT: HD D-sub15pin (female) R, G, B: Gain Unity: 75 ohms HD, VD: 4 Vp-p (open), 1 Vp-p (75 ohms) AUDIO OUT (variable out): Stereo minijack 1 Vrms (When the volume is maximum and an input signal is 500 mVrms), output impedance 5 kilohms or less REMOTE (VPL-EX70/EX7 only) RS-232C: D-sub 9 pin General Dimensions 314 × 109 × 269 mm (12 3/8 × 4 3/8 × 10 5/8 inches) (w/h/d) (without projecting parts) Mass VPL-EX70: Approx. 3.0 kg (6 lb 10 oz) VPL-EX7/ES7: Approx. 2.9 kg (6 lb 6 oz) Power requirements VPL-EX70/EX7: AC 100 to 240 V, 2.6 to 1.1 A, 50/60 Hz VPL-ES7: AC 100 to 240 V, 2.4 to 1.0 A, 50/60 Hz Power consumption VPL-EX70/EX7: Max.260 W (in standby: 3 W) VPL-ES7: Max.240 W (in standby: 3 W) Heat dissipation 884 BTU (VPL-EX70/EX7) 816 BTU (VPL-ES7) Operating temperature 0°C to 35°C (32°F to 95°F) Operating humidity 35% to 85% (no condensation) Storage temperature -20°C to +60°C (-4°F to +140°F) Storage humidity 10% to 90% Supplied accessories Remote Commander (1) Lithium battery CR2025 (1) 48 Specifications HD D-sub 15 pin cable (1.8 m) (1) (1-832-428-11, SONY) Carrying case (1) AC power cord (1) Lens cap (1) Operating Instructions (CD-ROM) (1) Quick Reference Manual (1) Safety Regulations (1) Security Label (1) Design and specifications are subject to change without notice. Note Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER. Optional accessories Projector Lamp LMP-E191 (for replacement) Some of the items may not be available in some areas. For details, please consult your nearest Sony dealer.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

48
Specifications
R: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
B: 0.7 Vp-p ±2 dB (75 ohms
terminated)
HD: Horizontal sync input: TTL
level, Positive/negative
VD: Vertical sync input: TTL
level, positive/negative
AUDIO INPUT
Stereo minijack, 500 mVrms,
input impedance 47 Kilohms or
more
OUTPUT
MONITOR OUT: HD D-sub15-
pin (female)
R, G, B: Gain Unity: 75 ohms
HD, VD: 4 Vp-p (open), 1 Vp-p
(75 ohms)
AUDIO OUT (variable out):
Stereo minijack
1 Vrms (When the volume is
maximum and an input signal is
500 mVrms), output impedance
5 kilohms or less
REMOTE (VPL-EX70/EX7 only)
RS-232C: D-sub 9 pin
General
Dimensions
314 × 109 × 269 mm (12
3
/
8
×
4
3
/
8
× 10
5
/
8
inches) (w/h/d)
(without projecting parts)
Mass
VPL-EX70:
Approx. 3.0 kg (6 lb 10 oz)
VPL-EX7/ES7:
Approx. 2.9 kg (6 lb 6 oz)
Power requirements
VPL-EX70/EX7: AC 100 to 240
V, 2.6 to 1.1 A, 50/60 Hz
VPL-ES7: AC 100 to 240 V, 2.4 to
1.0 A, 50/60 Hz
Power consumption
VPL-EX70/EX7: Max.260 W (in
standby: 3 W)
VPL-ES7: Max.240 W (in
standby: 3 W)
Heat dissipation
884 BTU (VPL-EX70/EX7)
816 BTU (VPL-ES7)
Operating temperature
0°C to 35°C (32°F to 95°F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Storage humidity
10% to 90%
Supplied accessories
Remote Commander (1)
Lithium battery CR2025 (1)
HD D-sub 15 pin cable (1.8 m) (1)
(1-832-428-11, SONY)
Carrying case (1)
AC power cord (1)
Lens cap (1)
Operating Instructions (CD-ROM)
(1)
Quick Reference Manual (1)
Safety Regulations (1)
Security Label (1)
Design and specifications are subject to change
without notice.
Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
Optional accessories
Projector Lamp
LMP-E191 (for replacement)
Some of the items may not be available in
some areas. For details, please consult your
nearest Sony dealer.
Note