Sony VPL-FHZ57 Operating Instructions - Page 5

Terminals Input (page 9) a INPUT A Video: RGB/YPBPR input terminal (RGB/YPBPR) Audio: Audio input terminal (AUDIO) b INPUT B Video: DVI-D input terminal (DVI-D) Audio: Audio input terminal (AUDIO) c INPUT C Video: HDMI input terminal (HDMI) Audio: HDMI input terminal (HDMI) d INPUT D HDBaseT terminal e VIDEO (VIDEO IN) Video: Video input terminal Audio: Audio input terminal (AUDIO) Notes • The audio input terminals of the projector are for output to external equipment. Connect external audio equipment to output audio (page 12). • The audio inputs of INPUT A, INPUT B, and VIDEO are shared. Output (page 12) f OUTPUT A Video: RGB/YPBPR output terminal (RGB/YPBPR) g OUTPUT B Video: DVI-D output terminal (DVI-D) h AUDIO OUT Audio: Audio output terminal (AUDIO) Note These terminals output projected images or audio. As for images, the signal input from INPUT A is output from OUTPUT A, and the signal input from INPUT B is output from OUTPUT B. However, if the signal input from INPUT B is protected by HDCP, the signal is not output from OUTPUT B. As for audio, when INPUT A or B, or VIDEO is selected, the audio signal input from the audio input terminal is output; when INPUT C or D is selected, the audio signal input from the selected input terminal is output. Others i RS-232C terminal RS-232C compatible control terminal j LAN terminal (page 13) k CONTROL S input terminal (DC power supply) (CONTROL S) Connects to the CONTROL S output terminal on the supplied Remote Commander with a connecting cable (stereo mini plug (not supplied)) when using it as a wired Remote Commander. You do not need to install batteries in the Remote Commander, as the power is supplied from this terminal. l AC IN (-) socket Connects the supplied AC power cord. 5