Sony VPL-FHZ57 Operating Instructions - Page 58

Item INPUT D VIDEO IN OUTPUT A Control signal input/output OUTPUT B Operating temperature/ Operating humidity Storage temperature/ Storage humidity Power required Power consumption AC 100 V to 120 V AC 220 V to 240 V Power consumption (Standby Mode) AC 100 V to 120 V AC 220 V to 240 V Description HDBaseT terminal: RJ45 HDBaseT transmittable signal: HDMI (Video, Audio), RS-232C, Ethernet (100BASE-TX) HDBaseT LAN cable: STP type (CAT5e or higher, straight, not supplied), Maximum length: 100 m Video input terminal: BNC, 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated Audio input terminal: Shared with INPUT A MONITOR output terminal: Mini D-sub 15-pin female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative, 75 ohms terminated, RGB/PBPR: 0.7 Vp-p ± 2 dB, 75 ohms terminated, Sync signal: HD, VD 4 V (open), 1 Vp-p (75 ohms), positive/negative Audio output terminal: Stereo mini jack, stereo, 1 Vrms (maximum volume, when inputting 500 mVrms), output impedance 5 kilohms DVI-D output terminal: DVI-D 24-pin (Single link), DVI 1.0 compliant, non-HDCP compliant RS-232C terminal: D-Sub 9 pin male LAN terminal: RJ45, 10BASE-T/100BASE-TX CONTROL S input terminal (DC power supply): Stereo mini jack, 5 Vp-p, Plug in power DC 5 V 0 °C to 40 °C (32 °F to 104 °F)/20% to 80% (no condensation) -10 °C to +60 °C (14 °F to +140 °F)/ 20% to 80% (no condensation) VPL-FHZ65/FWZ65: AC 100 V to 240 V, 5.5 A to 2.3 A, 50/60 Hz VPL-FHZ60/FHZ57/FWZ60: AC 100 V to 240 V, 4.5 A to 1.9 A, 50/60 Hz VPL-FHZ65: 509 W VPL-FHZ60: 420 W VPL-FHZ57: 370 W VPL-FWZ65: 464 W VPL-FWZ60: 383 W VPL-FHZ65: 492 W VPL-FHZ60: 408 W VPL-FHZ57: 355 W VPL-FWZ65: 453 W VPL-FWZ60: 372 W 0.50 W (when "Standby Mode" is set to "Low") 0.50 W (when "Standby Mode" is set to "Low") 58