Sony VPL-VW760ES Operating Instructions - Page 13
Selecting the Aspect Ratio According to the Video Signal
View all Sony VPL-VW760ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Image of the lens moving In the example below, the images with aspect ratio of 1.78:1 (16:9) and 2.35:1 are projected on a 2.35:1 screen. Selecting the Aspect Ratio According to the Video Signal When a 1.78:1 (16:9) image is input When a 2.35:1 image is input Press the POSITION button. You can select an aspect ratio best suited for the video signal received. Press ASPECT. Each time you press the button, you can select the "Aspect" setting.You can also select it using the menu (page 23). ASPECT button The 2.35:1 image expands to fill the screen. Notes • After you have selected and confirmed the lens position, the lens starts to move. Do not touch, or place anything near, the lens, otherwise it may cause injury or a malfunction. • If you press any button on the remote control or the unit while the lens is moving, the lens stops. In this case, select the lens position again or adjust the lens manually. • The Picture Position function is not guaranteed to reproduce the lens settings precisely. • When you use the subtended screen angle of two or more aspects using lens zoom, install the unit within the specified parameters referring to "Projection distance" (page 48). With some setting positions, the range of lens shift may be restricted, even though the unit is installed within the specified parameters. Original image 1.85:1 Squeezed 1.85:1 Recommended setting and resultant images 1.85:1 Zoom 2.35:1 Zoom 2.35:1 Squeezed 2.35:1 13