Sony VPL-VW760ES Operating Instructions - Page 37

Message Lists

Get Sony VPL-VW760ES PDF manuals and user guides View all Sony VPL-VW760ES manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Message Lists Warning messages Symptom High temp.! Light off in 1 min. Frequency is out of range! Projector temperature is high. High Altitude Mode should be "On" if Projector is being used at high altitude. Cause and Remedy Turn off the power. Check to ensure that nothing is blocking the ventilation holes. Frequency is out of range. Input a signal that is within the acceptable frequency range of the unit. Check to ensure that nothing is blocking the ventilation holes. When using the unit at high altitude, set "High Altitude Mode" to "On." Note Page - 3, 4 40 3, 4 25 When temperature inside the unit remains high, "High Altitude Mode" is switched to "On" in 1 minute, then the fan speed increases. Power Saving Mode is set. Projector "Power Saving" is set to "Standby." 25 will automatically enter Standby Mode in 1 minute. Note If no signal is input, the power turns off after 1 minute, and the projector goes into standby mode. Caution messages Symptom x Not applicable! Settings Lock enabled. Cause and Remedy No signal is input in the selected input. Check connections. Press the appropriate button. The operation to be activated by the button is currently prohibited. "Settings Lock" is set to "Level A" or "Level B." Page 10 - 27 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
37
Message Lists
Warning messages
Caution messages
Symptom
Cause and Remedy
Page
High temp.! Light off in 1 min.
Turn off the power.
–
Check to ensure that nothing is blocking the ventilation holes.
3, 4
Frequency is out of range!
Frequency is out of range. Input a signal that is within the acceptable frequency range of
the unit.
40
Projector temperature is high. High
Altitude Mode should be “On” if
Projector is being used at high
altitude.
Check to ensure that nothing is blocking the ventilation holes.
3, 4
When using the unit at high altitude, set “High Altitude Mode” to “On.”
When temperature inside the unit remains high, “High Altitude Mode” is switched to “On”
in 1 minute, then the fan speed increases.
25
Power Saving Mode is set. Projector
will automatically enter Standby
Mode in 1 minute.
“Power Saving” is set to “Standby.”
If no signal is input, the power turns off after 1 minute, and the projector goes into standby
mode.
25
Symptom
Cause and Remedy
Page
No signal is input in the selected input. Check connections.
10
Not applicable!
Press the appropriate button.
The operation to be activated by the button is currently prohibited.
–
Settings Lock enabled.
“Settings Lock” is set to “Level A” or “Level B.”
27
Note
Note
x