Sony VPL-VW760ES Operating Instructions - Page 36
About Indicators
View all Sony VPL-VW760ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
About Indicators The ON/STANDBY or WARNING indicator lights up or flashes if there is any trouble with your projector. ON/STANDBY WARNING indicator indicator Flashing/Lighting indicators (Lights in red) (Flashes in red) The number of flashes Three times Six times Twice Three times Cause and Remedy The unit does not light properly due to an abnormality of the light source and light source power. Turn off, then turn on the power after a while. If the symptom persists, consult qualified Sony personnel. The unit detects a drop impact. If there is abnormality on the unit, consult with qualified Sony personnel. If there are no abnormalities on the unit, disconnect the AC power cord and check that the ON/STANDBY indicator turns off, then connect the AC power cord and turn the unit on. The internal temperature is unusually high. Check to ensure that nothing is blocking the ventilation holes and the unit is not being used at high altitudes. The fan is broken. Consult with qualified Sony personnel. (Flashes in red) (Flashes in red) Both indicators flash Note If the symptom persists even after carrying out the above methods, consult with qualified Sony personnel. If the indicator starts flashing in a way of other than the above, turn off, and then turn on the power with the [/1 (On/Standby) button on the remote control or control panel of the unit. If the symptom is shown again, consult with qualified Sony personnel. 36