Sony VPLVW100 Operating Instructions - Page 30

2 Press the ?/1 (on/standby) switch to turn on the projector. The ON/STANDBY indicator flashes in green, and then lights in green. ON/ STANDBY Flashes in green for a few seconds, and then lights in green. 3 Turn on the equipment connected to the projector. Refer to the operating instructions of the connected equipment. 4 Press INPUT repeatedly to select the input you want to project on the screen. Display the indication of the input you want. Example: To view the picture from the video equipment connected to the VIDEO INPUT connector. INPUT Video To view the picture from Press INPUT to display Video equipment connected to the VIDEO INPUT connector Video Video equipment connected to S VIDEO INPUT connector S-Video Component equipment connected to Y/CB/PB/CR/PR on the Component projector RGB/component equipment connected to the INPUT A connector Input-A* Video equipment connected to the DVI-D connector DVI* Equipment connected to the HDMI connector HDMI *Set the "Input-A Signal Sel." setting and "DVI Signal Sel." setting in the Setup menu according to the signal input. When you set it to "Auto," and cannot display the picture properly, select an appropriate signal according to the input signal. (1 page 53) Tip When "Auto Input Search" is set to "On" in the Function menu, the channel of the input signal is automatically displayed when you press INPUT. 30 GB Projecting the Picture on the Screen