Sony VPLVW100 Operating Instructions - Page 50

Function menu The Function menu is used for changing the settings of the various functions of the projector. Picture Signal Function Auto Input Search : Test Pattern : Standby Mode : Power Saving: Off Off Standard Off Installation Setup Information Sel: Set: Back: Exit: Auto Input Search Test Pattern Standby Mode Power Saving Detects the input signal and displays the detected input signal automatically when the INPUT button is pressed. When set to "On," the projector detects whether a Component, HDMI, DVI, Video, S-Video or Input-A signal is input when the INPUT button is pressed. Then the detected input channel is automatically displayed. Set this to "Off" when you want to select a channel with no input signal, or you want to switch the channel manually. Displays the test pattern. When set to "On," a test pattern appears on the screen to be used when adjusting the lens with "Lens Focus," "Lens Zoom," and "Lens Shift," or correcting the screen proportions with "V Keystone." A test pattern does not appear when this item is set to "Off." Lowers the power consumption in standby mode. When set to "Low," the power consumption in standby mode is lowered. Sets the power saving mode. When set to "On," the projector goes into power saving mode if no signal is input for 10 minutes. At that time, the POWER SAVING indicator lights in orange. The screen becomes dark. In power saving mode, the power saving mode is cancelled if a signal is input or any button is pressed. If you do not want to set the projector to power saving mode, select "Off." GB 50 Function menu