Sony VPLVW100 Operating Instructions - Page 57

Controlling the Projector from a Computer Click "Control." You can perform various adjustments and settings of the projector on a computer display. The functions of the buttons in the windows are the same as those on the remote control supplied with the projector. Settings of the projector are lit. After you have changed the settings on the projector, click "Refresh" at the upper righthand corner of the window to update the status. The lighting buttons are changed. Setting up the Projector Click "Setup." The Password Properties dialog box appears. The name of the "User" account is preset without a password to "root" at the factory. You can set the owner information, etc. Click "Apply" at the lower part of each window to update the projector to the data input in each window. Operating the Projector from a Computer Owner and projector information Click "OWNER INFORMATION." Owner Enter owner information. Projector Enter the location of the projector. Memo Enter a memo, if required. Network settings Click "NETWORK." Internet Protocol (TCP/IP) Normally, set "Obtain an IP address automatically (DHCP)." If you select "Specify an IP address," set the necessary items. 57 Controlling the Projector from a Computer / Setting up the Projector GB