Sony VPLVW100 Operating Instructions - Page 52

High Altitude Mode Use this item when using the projector at high altitudes. Off: Use this setting when using the projector at normal altitudes. On: Use this setting when using the projector at an altitude of 1,500 m or higher. Note When this item is set to "On," the number of turns of the fan increases. Network Setting You can set internet protocols such as IP address, Subnet Mask, Default Gateway, and DNS Server when accessing the projector from a computer or using "ImageDirector2" application supplied. After completing all of settings, select "Apply" using m button, then press ENTER. IP Address Setup IP Address Subnet Mask Default Gateway Primary DNS Secondry DNS MAC Address Selects either "Auto (DHCP)" or "Manual." When you select "Manual," set the following "IP Address," "Subnet Mask," and "Default Gateway." Sets the IP Address of the projector. (1.0.0.0 to 223.255.255.255) Sets the Subnet Mask of the projector. (1.0.0.0 to 255.255.255.255) Sets the Default Gateway of the projector. (1.0.0.0 to 223.255.255.255) Sets the DNS server to be used as a priority. (1.0.0.0 to 223.255.255.255) Sets the alternative DNS server. (1.0.0.0 to 223.255.255.255) Displays MAC address of the projector. You cannot change. Note To use the Network setting function, set "Standby Mode" to "Standard" in the Function menu. (1 page 50) GB 52 Installation Menu