Sony VPLVW100 Operating Instructions - Page 61

Message Lists, Symptom, Cause and Remedy, Message - lamp life

Page 61 highlights

Symptom LAMP/COVER flashes. LAMP/COVER lights up. TEMP/FAN flashes. TEMP/FAN lights up. LAMP/COVER and TEMP/FAN light up. Cause and Remedy c Close the top cover and the lamp cover securely, or attach the filter holder securely. (1 pages 63 and 67) c The lamp has reached the end of its useful lifespan. Replace the lamp. (1 page 63) c The lamp has reached a high temperature. Wait until the lamp cools, and then turn on the power again. (1 page 32) c The fan is broken. Consult with qualified Sony personnel. c The internal temperature is unusually high. Check to ensure that if nothing is blocking the ventilation holes or whether or not the projector is being used at high altitudes. c Disconnect the AC power cord, re-connect it, then turn on the power again. If the indicators still light up, the electrical system has a problem. Consult with qualified Sony personnel. Others Message Lists Warning messages Message Cause and Remedy High temp.! Lamp off in 1 min. c Turn off the power. c Check to ensure that nothing is blocking the ventilation holes. (1 page 14) Frequency is out of range! c Frequency is out of range. Input a signal that is within the acceptable frequency range of the projector. Please check Input-A Signal Sel. c Set "Input-A Signal Sel." in the Setup menu to "Computer" when an RGB signal is input from a computer. (1 page 53) Please check DVI Signal Sel. c Set "DVI Signal Sel." in the Setup menu to "Computer" when an RGB signal is input from a computer. (1 page 53) Note Be sure to remove the DVI cable to disconnect the connection between the projector and a digital tuner and so on, before setting "DVI Signal Sel." Please replace the Lamp/ Filter. Lamp/Filter life remains less than 50H. c The lifespan of the lamp and the air filter is running out. (50 hours is an approximate figure.) Please replace the Lamp/ Filter. Lamp/Filter life remains less than 15H. c The lifespan of the lamp and the air filter is running out. (15 hours is an approximate figure.) Troubleshooting 61 GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259

61
GB
Troubleshooting
Others
Warning messages
Symptom
Cause and Remedy
LAMP/COVER flashes.
c
Close the top cover and the lamp cover securely, or attach the
filter holder securely. (
1
pages 63 and 67)
LAMP/COVER lights up.
c
The lamp has reached the end of its useful lifespan. Replace the
lamp. (
1
page 63)
c
The lamp has reached a high temperature. Wait until the lamp
cools, and then turn on the power again. (
1
page 32)
TEMP/FAN flashes.
c
The fan is broken. Consult with qualified Sony personnel.
TEMP/FAN lights up.
c
The internal temperature is unusually high. Check to ensure that
if nothing is blocking the ventilation holes or whether or not the
projector is being used at high altitudes.
LAMP/COVER and
TEMP/FAN light up.
c
Disconnect the AC power cord, re-connect it, then turn on the
power again. If the indicators still light up, the electrical system
has a problem. Consult with qualified Sony personnel.
Message Lists
Message
Cause and Remedy
High temp.! Lamp off in 1
min.
c
Turn off the power.
c
Check to ensure that nothing is blocking the ventilation holes.
(
1
page 14)
Frequency is out of range!
c
Frequency is out of range. Input a signal that is within the
acceptable frequency range of the projector.
Please check Input-A
Signal Sel.
c
Set “Input-A Signal Sel.” in the Setup
menu to
“Computer” when an RGB signal is input from a computer. (
1
page 53)
Please check DVI Signal
Sel.
c
Set “DVI Signal Sel.” in the Setup
menu to “Computer”
when an RGB signal is input from a computer. (
1
page 53)
Note
Be sure to remove the DVI cable to disconnect the connection
between the projector and a digital tuner and so on, before setting
“DVI Signal Sel.”
Please replace the Lamp/
Filter.
Lamp/Filter life remains
less than 50H.
c
The lifespan of the lamp and the air filter is running out. (50
hours is an approximate figure.)
Please replace the Lamp/
Filter.
Lamp/Filter life remains
less than 15H.
c
The lifespan of the lamp and the air filter is running out. (15
hours is an approximate figure.)