Sony WF-1000XM3 Help Guide - Page 38
Disconnecting the Android smartphone with one-touch NFC
View all Sony WF-1000XM3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Follow the on-screen instructions to complete the pairing and connection. When the headset is connected with the smartphone, you will hear voice guidance "Bluetooth connected" from the left unit. To disconnect, touch the headset again with the smartphone. To connect a paired smartphone, perform step 4. Unlock the screen of the smartphone if it is locked. Hint The above procedure is an example. For more details, refer to the operating instructions supplied with the Android smartphone. If you cannot connect the headset, try the following. Unlock the screen of the smartphone if it is locked, and move the smartphone slowly over the N-Mark. If the smartphone is in a case, remove the case. Check that the Bluetooth function of the smartphone is enabled. If you touch the charging case with the NFC-compatible smartphone, the smartphone terminates Bluetooth connection with any current device, and connects to the headset (One-touch connection switching). When the headset power is off, you cannot turn on the headset with the one-touch connection (NFC function) to turn on and connect the headset with the smartphone. Remove the headset from the charging case to turn on. If the headset is already removed from the charging case, tap the touch sensor or wear the headset. Related Topic Wearing the headset How to make a wireless connection to Bluetooth devices Disconnecting the Android smartphone with one-touch (NFC) Switching the device by one-touch (NFC) Listening to music from a device via Bluetooth connection 4-747-585-11(4) Copyright 2019 Sony Corporation 38