Sony WF-1000XM3 Help Guide - Page 41
Pairing and connecting with an iPhone
View all Sony WF-1000XM3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Help Guide Wireless Noise Canceling Stereo Headset WF-1000XM3 Pairing and connecting with an iPhone The operation to register the device that you wish to connect to is called "pairing". First, pair a device to use it with the headset for the first time. Before you start the pairing operation, make sure that: The iPhone is placed within 1 m (3 feet) of the headset. The headset is charged sufficiently. The operating instructions of the iPhone is in hand. 1 Remove both units of the headset from the charging case. The headset turns on automatically. Check that the indicator (blue) flashes. 2 Enter pairing mode on this headset. When you pair the headset with a device for the first time after purchase or after initializing the headset (if the headset has no pairing information), the headset enters pairing mode automatically if you remove the headset from the charging case. In this case, wear the headset and proceed to step 3. When you pair a second or subsequent device (if the headset has pairing information for other devices), put the headset in both ears, then hold your fingers to the touch sensors on both the left and right units for about 7 seconds. You will hear voice guidance "Bluetooth pairing" from the left unit. 3 Unlock the screen of the iPhone if it is locked. 41