Sony XDSPD1000 User Manual (XDS-PD1000 and XDS-PD2000 Operation Manual for Fir - Page 102
from the SD-SDI MONITOR/OUTPUT2SUPER or COMPOSITE, media, edit preset [edit]
View all Sony XDSPD1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Item number Item name 013 SYSTEM FREQUENCY SELECT MENU Settings Specify whether to enable switching the system frequencies. off: Do not enable switching the system frequencies. on: Enable switching the system frequencies. You can switch between the following frequencies. 1080/59.94i, 50i, 29.97P, 25P, 23.98P, 720/59.94P, 50P For details about switching the system frequencies, see page 40. Note Settings for both basic and extended menu items are saved separately for different system frequencies. • 1080 59.94i/29.97P • 1080 50i/25P • 1080 23.98P • 720 59.94P • 720 50P Therefore, when you switch system frequencies, all menu items are reset to the current settings for the new mode. (They are different from the setting for the previous mode.) 017 SUB STATUS DISPLAY SELECT Sets the sub status display that is output from the COMPOSITE OUTPUT MONI/2, HD-SDI OUTPUT1 2 (SUPER), HD-SDI MONITOR/OUTPUT2 2 (SUPER), SD-SDI OUTPUT1 2 (SUPER), and SD-SDI MONITOR/ OUTPUT2 2 (SUPER) connectors. off: Sub status is not output. media: Type of media currently in use. edit preset [edit]: Edit preset status a) media & edit preset [md&ed]: Type of media currently in use and edit preset status a) 027 SD CHARACTER Specify whether to superimpose text information on the SD video signal. Sub-item 1 SD-SDI2 b) 2 MONITOR SD b) Specify whether to superimpose text information on the video signal output from the SD-SDI OUTPUT1 2 (SUPER) connector. off: Do not superimpose. on: Superimpose. Specify whether to superimpose text information on the video signal output from the SD-SDI MONITOR/OUTPUT2 2 (SUPER) or COMPOSITE OUTPUT MONI/2 connector. off: Do not superimpose. all: Superimpose on the outputs from both the above connectors. comp: Superimpose on the output from the COMPOSITE OUTPUT MONI/2 connector. sdi: Superimpose on the output from the SD-SDI MONITOR/OUTPUT2 2 (SUPER) connector. 3 LCD/VGA Specify whether to superimpose text information over the display on the front panel, and on the video signal output from the MONITOR (VGA) connector. off: Do not superimpose. on: Superimpose. 028 HD CHARACTER Specify whether to superimpose text information on the HD video signal. Sub-item 1 HD-SDI2 Specify whether to superimpose text information on the video signal output from the HD-SDI OUTPUT1 2 (SUPER) connector. off: Do not superimpose. on: Superimpose. 2 MONITOR HD Specify whether to superimpose text information on the video signal output from the HD-SDI MONITOR/OUTPUT2 2 (SUPER) connector. off: Do not superimpose. sdi: Superimpose. Chapter 7 Menus 102 Setup Menu