Sony XDSPD1000 User Manual (XDS-PD1000 and XDS-PD2000 Operation Manual for Fir - Page 123
M3: OTHERS: Other setting items, PB-STOP STATUS [P.STP]
View all Sony XDSPD1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Item M37: AUDIO CONFIG M370: HEAD ROOM M371: DATA LEN M372: NON-AUDIO INPUT Sub-item 1 Tr1/Tr2 2 Tr3/Tr4 3 Tr5/Tr6 4 Tr7/Tr8 M373: IN LEVEL Sub-item 1 CH1/3/5/7 2 CH2/4/6/8 M377: OUT LEVEL M39: OTHER CONFIG M391: VITC REC M395: FRMT MEDIA M397: PORT CONFIGURATION M398: VDCP STATUS MODE M3A: GPIO SETUP Sub-item 1 IN 1 M3: OTHERS: Other setting items Setting Select the audio reference level (headroom). -20dB, -18dB, -16dB, -12dB, EBUL Note EBUL can be selected only when the system frequency is 50i/25P. Select the audio channel configuration for IMX recording. 16bit x 8ch [16x8]: 16-bit, 8-channel configuration 24bit x 4ch [24x4]: 24-bit, 4-channel configuration Select whether to handle digital audio signals as non-audio signals during recording. audio [Audio]: Handle as linear PCM audio signals. data: Handle as non-audio signals. Set the upper limit for the signal level input to audio channels 1/3/5/7 or 2/4/6/8. +4dB, 0dB, -3dB, -6dB, EBUL Note EBUL can be selected only when the system frequency is 50i/25P. Set the reference level for audio output signals. +4dB, 0dB, -3dB, -6dB, EBUL Note EBUL can be selected only when the system frequency is 50i/25P. Select whether to record the VITC in the input HDSDI signals in the LTC user bits area. disable [dis]: Do not record. enable [ena]: Record. Specify whether to disable the Format Media command of the Clip Menu. disable [dis]: Disable the Format Media command. enable [ena]: Enable the Format Media command. Set the port operation mode. 1-in/1-out mode [i/o]: Ports operate independently. VTR mode [vtr]: Ports operate together as input and output connectors. Set the operations to reflect in the VDCP status. VDCP [vdc]: Only operations via VDCP are reflected in the VDCP status. VDCP/FP/NetRMT [all]: Operations from VDCP, remote connection, and the front panel are reflected in the VDCP status. Set commands and statuses to be assigned to the pins of the GPIO connector. off: Do not assign any command or status. Commands to be assigned to pins IN 1 to IN 4: PB-STOP COMMAND [P.STP]: STOP command to the playback port PB-PLAY COMMAND [PLAY]: PLAY command to the playback port PB-RECUE COMMAND [RECUE]: RECUE command to the playback port REC-STOP COMMAND [R.STP]: STOP command to the recording port REC-REC COMMAND [REC]: REC command to the recording port Statuses to be assigned to pins OUT 1 to OUT 4: ALARM STATUS [ALARM]: Status of the alarm PB-STOP STATUS [P.STP]: Stop status of the playback port. PB-PLAY STATUS [PLAY]: Playback status of the playback port REC-REC STATUS [REC]: Recording status of the recording port Set the command to be assigned to pin IN 1. PB-STOP COMMAND [P.STP] Chapter 7 Menus 123 Maintenance Menu