Sony ZV-1M2 Help Guide - Page 147

Help Guide Digital Camera ZV-1M2 ISO (still image/movie) Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher the sensitivity. 1 ISO on the control wheel → select desired setting. You can also select MENU → (Exposure/Color) → [Exposure] → [ ISO]. Menu item details ISO AUTO: Sets the ISO sensitivity automatically. ISO 80 - ISO 12800: Sets the ISO sensitivity manually. Selecting a larger number increases the ISO sensitivity. Hint You can change the range of ISO sensitivity that is set automatically in [ISO AUTO] mode. Select [ISO AUTO] and press the right side of the control wheel, and set the desired values for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The higher the ISO value, the more noise will appear on the images. The available ISO settings will differ depending on whether you are shooting still images, shooting movies, or shooting slowmotion/quick-motion movies. When shooting movies, ISO values between 125 and 12800 are available. If the ISO value is set to a value smaller than 125, the setting is automatically switched to 125. When you finish recording the movie, the ISO value returns to the original setting. The available range for ISO sensitivity varies depending on the setting for [Gamma] under [ Picture Profile]. Note [ ISO] is set to [ISO AUTO] in the following shooting modes: [Intelligent Auto] [Scene Selection] When the ISO sensitivity is set to a value lower than ISO 125, the range for recordable subject brightness (dynamic range) may decrease. When you select [ISO AUTO] with the shooting mode set to [P], [A], [S] or [M], the ISO sensitivity will be automatically adjusted within the set range. If you point the camera at an extremely strong light source while shooting images with a low ISO sensitivity, highlighted areas in the images may be recorded as black areas. 5-049-603-11(1) Copyright 2023 Sony Corporation 147