Sony ZV-1M2 Help Guide - Page 198

Help Guide Digital Camera ZV-1M2 Starting tracking with touch operations (Touch Tracking) You can use touch operations to select a subject you want to track in the still image shooting mode and movie recording mode. Configure the settings as follows from MENU → (Setup) → [Touch Operation] in advance: [Touch Operation]: [On] [Shooting Screen] → [Shooting Screen]: [On] 1 MENU → Tracking]. (Setup) → [Touch Operation] → [Shooting Screen] → [Touch Func. in Shooting] → [Touch 2 Touch the subject that you want to track on the monitor. Tracking will start. Hint To cancel tracking, touch (Tracking release) icon or press the center of the control wheel. If you set [Touch Func. in Shooting] to [TouchTracking+AE], the brightness will be set according to the subject you touched. This will also allow you to fine-tune the brightness by sliding the brightness adjustment bar that appears after touching. Note [Touch Tracking] is unavailable in the following situations: When shooting movies with [Rec Frame Rate] under [ Movie Settings] set to [120p]/[100p] When [ File Format] is set to [XAVC S 4K] and [ Proxy Recording] is set to [On] When [ File Format] is set to [XAVC S 4K] and outputting a movie via HDMI When [ Focus Mode] is set to [Manual Focus]. When using Smart Zoom, Clear Image Zoom, or Digital Zoom If the focus mode is switched to [Manual Focus] while [Touch Func. in Shooting] is set to [Touch Tracking], the setting value for [Touch Func. in Shooting] will be changed to [Touch Focus]. Related Topic Touch Operation Shooting Screen 5-049-603-11(1) Copyright 2023 Sony Corporation 198