Sony ZV-1M2 Help Guide - Page 233

Help Guide Digital Camera ZV-1M2 TC/UB The time code (TC) and the user bit (UB) information can be recorded as data attached to movies. 1 MENU → (Shooting) → [TC/UB] → Select a menu item and set the desired parameter. Menu item details Time Code Preset: Sets the time code. User Bit Preset: Sets the user bit. Time Code Format: Sets the recording method for the time code. (Only when [NTSC/PAL Selector] is set to NTSC.) Time Code Run: Sets the count up format for the time code. Time Code Make: Sets the recording format for the time code on the recording medium. User Bit Time Rec: Sets whether or not to record the time as a user bit. How to set the time code (Time Code Preset) 1. MENU → (Shooting) → [TC/UB] → [Time Code Preset]. 2. Turn the control wheel and select the first two digits. The time code can be set between the following range. When [60p] is selected: 00:00:00.00 to 23:59:59.29 * When [24p] is selected, you can select the last two digits of the time code in multiples of four from 00 to 23 frames. When [50p] is selected: 00:00:00.00 to 23:59:59.24 3. Set the other digits following the same procedure as in step 2, then press in the center of the control wheel. How to reset the time code 1. MENU → 2. Press the (Shooting) → [TC/UB] → [Time Code Preset]. (Delete) button to reset the time code (00:00:00.00). How to set the user bit (User Bit Preset) 1. MENU → (Shooting) → [TC/UB] → [User Bit Preset]. 2. Turn the control wheel and select the first two digits. 3. Set the other digits following the same procedure as in step 2, then press in the center of the control wheel. How to reset the user bit 233