Sony ZV-1M2 Help Guide - Page 201

Help Guide Digital Camera ZV-1M2 Adjusting the exposure with touch operations (Touch AE) You can automatically set the exposure based on the brightness of a point you touch. Configure the settings as follows from MENU → (Setup) → [Touch Operation] in advance: [Touch Operation]: [On] [Shooting Screen] → [Shooting Screen]: [On] 1 MENU → (Setup) → [Touch Operation] → [Shooting Screen] → [Touch Func. in Shooting] → select [Touch AE]. 2 Touch the point that you want to set as the basis for the exposure. The camera will set the exposure based on the brightness of the point you touched. You can fine-tune the brightness with sliding the brightness adjustment bar that appears after touching. Hint The adjustment using the brightness adjustment bar is reflected in the exposure compensation value. When [Touch Func. in Shooting] is set to [Touch Focus]/[Touch Tracking]/[Touch Shutter], you can select whether or not to perform [Touch AE] at the same time by pressing the left or right side of the control wheel. Note [Touch AE] is not available in the following situations: When using digital zoom function If the subject is extremely bright or dark, the adjustment bar may not be sufficiently effective. Related Topic Touch Operation Shooting Screen 5-049-603-11(1) Copyright 2023 Sony Corporation 201