Sony ZV-1M2 Help Guide - Page 93
Shoot Mode: Manual Exposure
View all Sony ZV-1M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Help Guide Digital Camera ZV-1M2 Shoot Mode: Manual Exposure You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture. 1 Press the Still/Movie/S&Q button to select the desired shooting mode. 2 MENU → (Shooting) → [Shooting Mode] → [ Shoot Mode]/[ Shoot Mode]/[ [Manual Exposure]. Shoot Mode] → 3 Press the down side of the control wheel to select the shutter speed or aperture value, then turn the control wheel to select a value. You can also set [ ISO] to [ISO AUTO] in manual exposure mode. The ISO value automatically changes to achieve the appropriate exposure using the aperture value and shutter speed you have set. When [ ISO] is set to [ISO AUTO], the ISO value indicator will blink if the value you have set is not suitable for appropriate exposure. If this happens, change the shutter speed or aperture value. When [ ISO] is set to other than [ISO AUTO], use MM (Metered Manual)* to check the exposure value. Toward +: Images become brighter. Toward -: Images become darker. 0: Appropriate exposure analyzed by the camera. * Indicates under/over for appropriate exposure. 4 Adjust the focus and shoot the subject. Hint You can change the shutter speed and aperture (F-value) combination without changing the set exposure value (Manual shift). Assign [AEL hold] or [AEL toggle] to a desired key using the custom key settings, and then turn the control wheel while pressing that key. Note The Metered Manual indicator does not appear when [ ISO] is set to [ISO AUTO]. When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes. The SteadyShot warning indicator does not appear in manual exposure mode. The brightness of the image on the screen may differ from the actual image being shot. You cannot set [ ND Filter] to [Auto]. Related Topic ISO (still image/movie) 93