Stihl 017 Instruction Manual - Page 29
over the stud
View all Stihl 017 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
10 135BA009 KN 135BA011 KN 12 11 9 135BA010 KN 135BA008 KN Wear work gloves to protect hands. •• Fit the chain - start at the bar nose pay attention to position of tensioning gear and the cutting edges. • Turn tensioning gear (9) clockwise up to the stop. • Disengage the chain brake: Pull hand guard (10) toward the front handle. • Turn the guide bar so that the tensioning gear is facing you. • Fit the chain over the sprocket (11) and slip the guide bar over the stud (12) - the head of the rear collar stud must locate in the slot. • Make sure the drive link tangs engage the bar groove (see arrow) and then rotate tensioning gear counterclockwise up to the stop. 017, 018 27
•
Wear work gloves to protect hands.
•
Fit the chain - start at the bar nose -
pay attention to position of tensio-
ning gear and the cutting edges.
•
Turn tensioning gear
(9)
clockwise
up to the stop.
•
Disengage the chain brake:
Pull hand guard
(10)
toward the
front handle.
•
Turn the guide bar so that the
tensioning gear is facing you.
•
Fit the chain over the
sprocket
(11)
and slip the guide bar
over the stud
(12)
-
the head of the
rear collar stud must locate in the
slot.
•
Make sure the drive link tangs
engage the bar groove (see arrow)
and then rotate tensioning gear
counterclockwise up to the stop.
9
135BA008 KN
10
135BA009 KN
11
12
135BA010 KN
135BA011 KN
017, 018
27