Stihl 017 Instruction Manual - Page 49

Specifications Engine STIHL single cylinder two-stroke engine 017 Displacement: Bore: Stroke: 30.1 cm3 (1.89 cu. in) 37 mm (1.46 in) 28 mm (1.10 in) 018 Displacement: Bore: Stroke: 31.8 cm3 (1.91 cu. in) 38 mm (1.50 in) 28 mm (1.10 in) Ignition System Electronic magneto ignition Spark plug (suppressed): BOSCH WSR 6 F NGK BPMR 7 A or Champion RCJ 6 Y Heat range 200 Electrode gap 0.5 mm (0.02 in) Spark plug thread M 14x1.25, 9.5 mm (0.37 in) long Fuel/Oil System Carburetor: All position diaphragm carburetor with integral fuel pump Air filter: Felt mat Fuel tank capacity: 0.25 l (0.53 US pt) Fuel mix: See chapter "Fuel Mix" Chain lubrication: Fully automatic speed-controlled rotary piston oil pump. Oil tank capacity: 0.15 l (0.32 US pt) Weight without bar and chain 017: 3.9 kg (8.60 lbs) 018: 3.9 kg (8.60 lbs) 017, 018 Cutting Attachment Recommended cutting attachments for compliance with § 5.12 of ANSI Standard B 175.1-1991 (see page 12 of this Manual): STIHL reduced kickback bar (with green label) for 3/8" Picco pitch: - Picco Micro Mini gauge (1.1 mm) - Picco Micro gauge (1.3 mm) Rollomatic with sprocket nose 30 or 35 cm (12 or 14 in) STIHL low kickback chain* (with green label) for 3/8" Picco pitch: 9.32 mm (3/8") Picco Micro Mini (61PMN) 9.32 mm (3/8") Picco-Micro1 (63 PM1) Chain sprocket: 6- tooth for 3/8" Picco pitch Since new bar/chain combinations may be developed after publication of this Manual, ask your STIHL dealer for the latest STIHL recommendations. In order to comply with the kickback performance requirements of § 5.12 of ANSI Standard B 175.1-1991, do not use replacement saw chain unless it has been designated as meeting the ANSI § 5.12 requirements on this specific powerhead, or has been designated as "low kickback" saw chain* in accordance with the ANSI B 175.11991 standard. * See definition of "low kickback chain" on page 12 of this Manual. 47