Stihl 017 Instruction Manual - Page 9

Preparation for the use of the saw, Warning, Fueling, Fueling Instructions

Get Stihl 017 PDF manuals and user guides View all Stihl 017 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Preparation for the use of the saw Take off the chain guard and inspect for safety in operation. For assembly, follow the procedure described in the chapter "Mounting the Bar and Chain" of your Owner's Manual. STIHL Oilomatic chain, guide bar and sprocket must match each other in gauge and pitch. Before replacing any bar and chain, see the sections on "Specifications", "Kickback" and the "ANSI B 175.1-1991 chainsaw kickback standard" in this manual. !Warning! Proper tension of the chain is extremely important. In order to avoid improper setting, the tensioning procedure must be followed as described in your manual. Always make sure the hexagonal nut(s) for the sprocket cover is (are) tightened securely after tensioning the chain. Never start the saw with the sprocket cover loose. Check chain tension once more after having tightened the nut(s) and thereafter at regular intervals (whenever the saw is shut off). If the chain becomes loose while cutting, shut off the engine and then tighten. Never try to tighten the chain while the engine is running! Fueling Your STIHL chainsaw uses an oil-gasoline mixture for fuel (see chapter "Fuel" of your Owner's Manual). !Warning! Gasoline is an extremely flammable fuel. If spilled or ignited by a spark or other ignition source, it can cause fire and serious burn injury or property damage. Use extreme caution when handling gasoline or fuel mix. Do not smoke or bring any fire or flame near the fuel or the chainsaw. Note that combustible fuel vapors may be vented from the fuel system. Fueling Instructions !Warning! Fuel your chainsaw in well-ventilated areas, outdoors only. Always shut off the engine and allow it to cool before refueling. Gasoline vapor pressure may build up inside the gas tank of a two cycle engine depending on the fuel used, the weather conditions, and the venting system of the tank. In order to reduce the risk of burns or other personal injury from escaping gas vapor and fumes, remove the fuel filler cap on the STIHL product carefully so as to allow any pressure build-up in the tank to release slowly. Never remove fuel filler cap while engine is running. Select bare ground for fueling and move at least 10 feet (3 m) from fueling spot before starting the engine. Wipe off any spilled fuel before starting your saw, and check for leakage. !Warning! Check for fuel leakage while refueling and during operation. If fuel or oil leakage is found, do not start or run the engine until leak is fixed and spilled fuel has been wiped away. Take care not to get fuel on your clothing. If this happens, change your clothing immediately. 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
Preparation for the use of the saw
Take off the chain guard and inspect for
safety in operation. For assembly, follow
the procedure described in the chapter
“Mounting the Bar and Chain” of your
Owner’s Manual.
STIHL Oilomatic chain, guide bar and
sprocket must match each other in
gauge and pitch.
Before replacing any bar and chain,
see the sections on “Specifications”,
"Kickback" and the "ANSI B 175.1-1991
chainsaw kickback standard" in this
manual.
!
Warning!
Proper tension of the chain is extremely
important. In order to avoid improper
setting, the tensioning procedure must
be followed as described in your manual.
Always make sure the hexagonal nut(s)
for the sprocket cover is (are) tightened
securely after tensioning the chain.
Never start the saw with the sprocket
cover loose. Check chain tension once
more after having tightened the nut(s)
and thereafter at regular intervals (when-
ever the saw is shut off). If the chain
becomes loose while cutting, shut off the
engine and then tighten. Never try to
tighten the chain while the engine is
running!
Fueling
Your STIHL chainsaw uses an oil-gaso-
line mixture for fuel (see chapter “Fuel”
of your Owner’s Manual).
!
Warning!
Gasoline is an extremely flammable fuel.
If spilled or ignited by a spark or other
ignition source, it can cause fire and
serious burn injury or property damage.
Use extreme caution when handling
gasoline or fuel mix.
Do not smoke or bring
any fire or flame near the
fuel or the chainsaw.
Note that combustible
fuel vapors may be vented
from the fuel system.
Fueling Instructions
!
Warning!
Fuel your chainsaw in well-ventilated
areas, outdoors only. Always shut off the
engine and allow it to cool before refue-
ling. Gasoline vapor pressure may build
up inside the gas tank of a two cycle
engine depending on the fuel used, the
weather conditions, and the venting
system of the tank. In order to reduce
the risk of burns or other personal injury
from escaping gas vapor and fumes,
remove the fuel filler cap on the STIHL
product carefully so as to allow any
pressure build-up in the tank to release
slowly. Never remove fuel filler cap while
engine is running.
Select bare ground for fueling and move
at least 10 feet (3 m) from fueling spot
before starting the engine. Wipe off any
spilled fuel before starting your saw, and
check for leakage.
!
Warning!
Check for fuel leakage while refueling
and during operation. If fuel or oil leakage
is found, do not start or run the engine
until leak is fixed and spilled fuel has
been wiped away. Take care not to get
fuel on your clothing. If this happens,
change your clothing immediately.
7