Stihl 017 Instruction Manual - Page 37
as soon as engine runs, immediately, move to the run position 5
View all Stihl 017 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
STOP 0 5 3 4 143BA020 KN 143BA021 KN 143BA012 KN • Pull the starter grip slowly with your right hand until you feel it engage then give the grip a brisk strong pull and push down the front handle at the same time. • Do not pull out starter rope more than 70 cm (about 28 in) it might otherwise break. • Do not let the starter grip snap back - guide it slowly into the housing so that the starter rope can rewind properly. • If engine is new, pull starter grip several times to prime the fuel line. 017, 018 When engine begins to fire: • Move Master Control lever (3) to n and continue cranking as soon as engine runs, immediately blip the throttle trigger (4) the Master Control lever (3) will move to the "run" position (5) # and the engine settles down to idling speed. As the chain brake is still engaged, the engine must be returned to idling speed immediately to avoid damage to the engine and chain drive (clutch). • Pull the hand guard back toward the front handle: = The chain brake is now disengaged your saw is ready for operation. Always disengage chain brake before accelerating engine and before starting cutting work. High revs with the chain brake engaged (chain locked) will quickly damage the powerhead and chain drive (clutch, chain brake). Observe safety precautions •• Always check operation of chain lubrication before starting work. Shut down engine: • Move Master Control lever to b 35