Stihl FC Attachment Instruction Manual - Page 13
Approved KombiEngines, Assembling the Unit
View all Stihl FC Attachment manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
N Always walk forwards when cutting, do not pull the unit towards you. N Cut at a steady pace to avoid having to make several passes. Approved KombiEngines KombiEngines English Assembling the Unit Only use KombiEngines supplied or 1 explicitly approved by STIHL for use with the attachment. 413BA014 KN This KombiTool may be operated only in combination with the following KombiEngines: STIHL KM 55 R, KM 56 R, KM 85 R, KM 90 R, KM 94 R, KM 110 R, KM 130 R, KMA 130 R, KMA 135 R N Pull the protective caps off of the ends of the shaft and keep them in a safe place for later use - see "Storing the Machine" WARNING Loop-handled machines must be equipped with a barrier bar. Connecting drive tube to gearbox 1 239BA017 KN N Use the gunning sight (1) to line the 2 blade up with the edge of the bed. 239BA018 KN N Loosen the clamping screw (1) on the gearbox - do not remove N Insert curved end of drive tube (3) in the gearbox (2), turn the gearbox back and forth as necessary. N Push the shaft (3) in as far as it will go. N Screw in the clamping screw (1) as far as it will go - do not tighten yet! FCB-KM 11