Stihl FC Attachment Instruction Manual - Page 16

English Storing the Machine Replacing the Depth Wheel Replacing the Skirt For periods of 3 months or longer N Remove, clean and inspect the cutting blade. Have a worn depth wheel replaced by a servicing dealer. STIHL recommends that you have servicing and repair work carried out exclusively by an authorized Removing the skirt N If the KombiTool is removed from STIHL servicing dealer. the KombiEngine and stored separately: Fit the protective cap on Depth Wheel the drive tube to avoid dirt getting into the coupling. 5 N Store the machine in a dry, high or locked location - out of the reach of children and other unauthorized persons. 1 2 4 1 6 2 239BA023 KN 239BA024 KN N The end of the thread on the screw (1) is peened over to ensure that the wingnut (2) does not work loose and be lost. A very high torque has to be applied to remove the wingnut from the screw. If the parts are then reassembled, the captive function is no longer guaranteed. In such a case have the screw and wingnut replaced by a servicing dealer. 3 N Undo and remove the screw (1). N Remove the washer (2) N Pull the skirt (3) out of the segment (6) and out of the gap (5) in the deflector 14 FCB-KM