Stihl FC Attachment Instruction Manual - Page 15

N Turn nut clockwise (left-hand thread) and remove it. N Remove the thrust washer. 7 10 6 47 9 8 English Starting / Stopping the Engine Starting the engine To start the engine, basically follow the instructions for use for the KombiEngine or basic power tool! NOTICE Do not stand or kneel on the shaft! WARNING If the engine is started, the blade may rotate as soon as the engine is running - therefore blip the throttle trigger as soon as the engine is running - the engine begins to idle. The other starting procedure is described in the instruction manual for the KombiEngine or basic power tool. Switching off the engine 9926BA009 KN N see instruction manual for the KombiEngine or basic power tool 239BA022 KN 9926BA010 KN N Position the blade (7) on the thrust plate (8). WARNING The collar (arrow) must engage the hole in the blade. N Fit the thrust washer (4) on the shaft (9) and block the shaft. N Screw nut (6) counterclockwise onto shaft and tighten. WARNING If the cup spring (10) on the nut (6) becomes fatigued, then the nut must be replaced! N Place the machine on the ground in a secure position The blade must not touch the ground or any other objects - risk of accident! N Assume a firm stance - possibilities: standing, bending or kneeling N Press the machine firmly against the ground with the left hand - do not touch the control elements on the control handle while doing so - see instruction manual for the KombiEngine or basic power tool FCB-KM 13