Stihl FH Attachment Instruction Manual - Page 12
Mounting the Attachment
View all Stihl FH Attachment manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
228BA091 KN 228BA081 KN English Mounting the Attachment Preparations for Mounting the Attachment WARNING To reduce the risk of injury, always shut off the engine before converting the basic power tool. NOTICE Make sure the work area is clean before mounting or removing the attachment. N Rest the power tool on the machine support. Removing the Protective Cap If a cap is fitted on the end of the power tool's drive tube: If the plug comes out of the drive tube when you pull off the cap: N Push the plug into the drive tube as far as stop. Removing the gearbox or attachment Remove any existing gearbox or interchangeable attachment from the basic power tool. BF 002BA248 KN FCS FH/HL FH/HL 228BA092 KN 413BA014 KN FCS N Pull the protective cap off the end of FS the drive tube and keep it in a safe place. 0000-GXX-1866-A0 228BA090 KN 228BA083 KN 10 FH