Stihl FH Attachment Instruction Manual - Page 3

Original Instruction Manual Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. Contents Interchangeable Attachments 2 Guide to Using this Manual 2 Safety Precautions and Working Techniques 3 Using the Unit 8 Approved Basic Power Tools 9 Mounting the Attachment 10 Adjusting the Cutter Bar 13 Fitting the Harness 14 Starting / Stopping the Engine 16 Lubricating the Gearbox 16 Storing the Machine 17 Maintenance and Care 17 Sharpening Instructions 18 Main Parts 19 Specifications 20 Maintenance and Repairs 20 Disposal 21 Trademarks 21 English Allow only persons who fully understand the manuals of the basic power tool and your power scythe attachment to operate this power tool combination. To receive maximum performance and satisfaction from your STIHL power scythe attachment, it is important that you read, understand and follow the safety precautions and the operating and maintenance instructions in chapter "Safety Precautions and Working Techniques" before using your power scythe attachment. For further information you can go to www.stihlusa.com. Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this manual. WARNING Because a power tool power head and shaft equipped with a power scythe attachment is a high-speed, fast-cutting power tool, some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. © ANDREAS STIHL AG & Co. KG, 2019 0458-226-8621-B. VA1.C19. 0000007535_003_GB This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. FH 1