Stihl FH Attachment Instruction Manual - Page 22
Specifications, Maintenance and Repairs
View all Stihl FH Attachment manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
English Definitions 1 Cutting Blades Steel blades for cutting hedges and shrubs. 2 Blade Drive Gear Converts rotary movement of angle drive into reciprocating movement of cutting blades. 3 Drive Tube Encloses and protects the drive shaft between the coupling sleeve and gearbox. 4 Sliding Sleeve Locks and unlocks the cutter bar adjusting mechanism. 5 Adjusting Lever Used to set cutter bar to the required angle. 6 Quadrant Locks the cutter bar in the required position. 7 Blade Scabbard Covers cutting blades when hedge trimmer is not in use. Specifications Cutting blades Type: Cutting length: Tooth spacing: Tooth height: Sharpening angle: Weight Doubleedged for bidirectional cutting 250 mm (9.843 in) 34 mm (1.339 in) 22 mm (0.866 in) 45° to horizontal Attachment: 1.5 kg (3.3 lbs) Maintenance and Repairs Users of this unit should carry out only the maintenance operations described in this manual. STIHL recommends that other repair work be performed only by authorized STIHL servicing dealers using genuine STIHL replacement parts. Genuine STIHL parts can be identified by the STIHL part number, the { logo and, in some cases, by the STIHL parts symbol K. The symbol may appear alone on small parts. For repairs of any component of this unit's air emissions control system, please refer to the air emissions systems warranty in this manual. 20 FH