Stihl FS 120 Product Instruction Manual - Page 20
Approved Combinations of Cutting Tool, Deflector, Handle, and Harness
View all Stihl FS 120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Approved Combinations of Cutting Tool, Deflector, Handle and Harness English / USA Cutting Tools 1 STIHL SuperCut 20-2 2 STIHL AutoCut 25-2 3 STIHL AutoCut 30-2 4 STIHL TrimCut 30-2 5 STIHL PolyCut 20-3 6 STIHL FixCut 25-2 7 Grass cutting blade 230-4 8 Grass cutting blade230-8 9 Brush knife 250 10 Scratcher tooth circular saw blade 200 11 Chisel tooth circular saw blade 200 Grass cutting blades, brush knifes and circular saw blades made of any other non-metal material are not permitted. Deflectors 12 Deflector for mowing heads only 13 Deflector with 14 Skirt and blade for all mowing heads (see 'Mounting the Deflector') 15 Deflector without skirt and blade for all metal mowing tools and brush knife 16 Limit stop for circular saw blades Handles 17 Loop handle 18 Loop handle with 19 Barrier bar 20 Bike handle Harnesses 21 Shoulder strap may be used 22 Shoulder strap must be used 23 Full harnesss may be used 24 Full harnesss must be used Equipment Among other parts, the complete unit includes: - Cutting tool - Deflector - Handle - Harness (bike handle unit only) Select the correct combination from the table according to the cutting tool you intend to use. Read the table horizontally from left to right. Other combinations, e.g. reading the table diagonally, are not permitted. ! Warning! To reduce the risk of injury from thrown objects and blade contact, never operate your unit without the proper deflector for the cutting attachment being used. To reduce the risk of injury from loss of control and / or contact with the cutting tool, make sure your unit is equipped with a proper handle and harness for the type of cutting attachment being used. ! Warning! STIHL brushcutters with a loop handle without barrier bar may be used only with the above mentioned mowing head with nylon line or plastic blades. Other plastic or metal cutting tools, but not circular saw blades, may be used only on brushcutters with a bike handle or loop handle with barrier bar in order to reduce the risk of personal injury through contact with the cutting tool.To reduce the risk of serious injury to the operator or bystanders by kickout, never use a circular saw blade on a brushcutter with a loop handle. Circular saw blades may be used only on brushcutters with a bike handle. FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R 19