Stihl FS 120 Product Instruction Manual - Page 27
Mounting the Cutting Tools
View all Stihl FS 120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
002BA103 KN 002BA028 KN 002BA104 KN English / USA Mounting the Cutting Tools 77 4 6 4 1 5 7 Preparations : Lay your brushcutter on its back with the gearhead facing upward. Fitting skirt and blade These parts must be fitted to the deflector (1) when you use a mowing head: : Slide the lower guide slot of the skirt (4) onto the deflector (1) - it must snap into position. : Push the blade (5) into the upper guide slot on the skirt and line it up with the first hole. : Fit the screw and tighten it down firmly. Mounting the stop : Always fit stop (6) when you use a circular saw blade. : Place the stop on the gearhead flange. : Fit the three M 5 x 18 screws (7) and tighten down securely. Mounting Hardware for Cutting Tools The mounting hardware supplied depends on the cutting tool that comes as original equipment with the new brushcutter. Mounting hardware is not packed with the machine Only mowing heads may be mounted. 26 FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R