Stihl FS 120 Product Instruction Manual - Page 22
Approved Power Tool, Attachments, Mounting the Bike Handle
View all Stihl FS 120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Approved Power Tool Attachments Mounting the Bike Handle English / USA A 7 250BA046 KN STIHL power tool attachments are available for converting the single purpose FS unit into other power tool combinations. Attachment BF 1) BC 35 1) Application Cultivator Cultivator 1) Barrier bar must be fitted on the loop handle 1 Removing Clamp Moldings : Hold the lower clamp (1) and upper clamp (2) firmly. : Release the wing screw (3). The clamps are loose once the wing screw has been released. They are pushed apart by the two springs (4 and 5). : Pull out the wing screw. Washer (6) remain at the tommy screw . : Separate the clamps. Springs (4) and (5) remain in the lower clamp. Mounting the Handlebar : Place the handlebar (7) in the lower clamp (1) so that distance A is no more than 6 in (15 cm). : Place the upper clamp in position and hold both clamps together. : Push the wing screw, with washer, through the two clamps as far as stop - hold all parts together and secure them. FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R 21