Stihl MS 192 T C-E Technical Overview

Stihl MS 192 T C-E Manual

Get Stihl MS 192 T C-E PDF manuals and user guides View all Stihl MS 192 T C-E manuals
Add to My Manuals
Save this manual to your list of manuals

Stihl MS 192 T C-E manual content summary:

  • Stihl MS 192 T C-E | Technical Overview - Page 1
    STIH) Technical Information 02.2005 New STIHL MS 192 T Tree Surgery Chainsaw - Series 1137 Contents 1. Technical description 2. Specifications 3. Service accessories and special tools 4. Service notes TI_02_2005_11_01_01.fm englisch / English
  • Stihl MS 192 T C-E | Technical Overview - Page 2
    Page 2 Technical Information 02.2005 The new STIHL MS 192 T tree surgery chain saw is tailored for professional tree care. Areas of use are gardening and landscaping, roadside tree trimming and park maintenance. The STIHL MS 192 T is the lightest tree surgery chainsaw of its performance class. Its
  • Stihl MS 192 T C-E | Technical Overview - Page 3
    performance over a long service life. Crankshaft . Five-part, light crankshaft Carburetor . Diaphragm carburetor with full-throttle partially fixed nozzle, idle fixed nozzle and premixture regulation . The setting range of the main set screw is limited by a limiter cap (approx. 3/4 turn). This
  • Stihl MS 192 T C-E | Technical Overview - Page 4
    Page 4 Technical Information 02.2005 1.3 Service-friendly design All service-relevant components are accessible in a few steps. Fanwheel side 1.4 Oil and fuel tank . Only remove four screws to access the ignition module, flywheel and rewind starter. Sprocket side . Fuel caps with a folding clip
  • Stihl MS 192 T C-E | Technical Overview - Page 5
    Technical Information 02.2005 Page 5 2. Specifications 2.1 Engine STIHL single cylinder two-stroke engine Displacement: Bore: Stroke: Engine power to ISO 7293 Idle speed: Permissible max. speed with bar and chain: 30.1 cm³ 37 mm 28 mm 1.3 kW 3,000 rpm 13,500 rpm Sound pressure level Lpeq to
  • Stihl MS 192 T C-E | Technical Overview - Page 6
    Part name Strap retainer Part number Use 1137 893 2600 Tension the piston rings The available special tools are listed in the repair instructions for the STIHL MS 192 T. 3.3 Warnings, identification Part name Tag Part number Use 0457 927 0000 Identifies tree surgery chainsaws at point of sale
  • Stihl MS 192 T C-E | Technical Overview - Page 7
    Technical Information 02.2005 4. Service notes 4.1 Carburetor Adjustment 4.1.1 Mechanical design Page 7 With this carburetor, the high speed adjusting screw H can only be adjusted by the user within a range of 270° (3/4 turn). The carburetor has been adjusted for optimum performance and fuel
  • Stihl MS 192 T C-E | Technical Overview - Page 8
    8 4.1.2 Maintenance / repair Technical Information 02.2005 4.1.3 Basic setting without limiter cap The limiter cap for the main set screw must be taken off when exchanging a damaged set screw or cleaning the carburetor. . Remove the limiter cap with a suitable tool (1) A used cap may not be reused
  • Stihl MS 192 T C-E | Technical Overview - Page 9
    Technical Information 02.2005 4.1.4 Securing the limiter cap Page 9 4.2 Standard setting with limiter cap The limiter cap must not be removed when making the standard setting. A used cap may not be reused, as they are damaged when pulled off. . Place the new limiter cap (1) for the H screw aligned
  • Stihl MS 192 T C-E | Technical Overview - Page 10
    necessary to disassemble the complete engine in order to replace the oil seals. Technical Information 02.2005 4.5 Chain Catcher 1 = oil seal 9639 003 1205 2 = oil seal 9639 003 1206 Different oil seals are available for installing in a closed or open crank case. . Use oil seal (1) 9639 003 1205
  • Stihl MS 192 T C-E | Technical Overview - Page 11
    Technical Information 02.2005 4.6 Sprocket and worm Page 11 4.8 Location of the serial number The worm for the oil pump must match the number of teeth of the sprocket. When replacing the sprocket with another with a different number of teeth, the worm also has to be replaced. Chain Sprocket 6-
  • Stihl MS 192 T C-E | Technical Overview - Page 12
    Information 02.2005 4.9 Repair times The repair times are specified for trained specialist personnel and a fully equipped customer service repair shop. The repair times are specified in minutes. Repair activity MS 192 T 1 Pressure testing the crankcase, 60 engine pan 2 Engine housing
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
STIH)
Technical Information
TI_02_2005_11_01_01.fm
englisch / English
New STIHL MS 192 T Tree Surgery Chainsaw – Series 1137
Contents
1.
Technical description
2.
Specifications
3.
Service accessories and special tools
4.
Service notes
02.2005