Stihl MS 192 T C-E Technical Overview - Page 5

Technical Information 02.2005 Page 5 2. Specifications 2.1 Engine STIHL single cylinder two-stroke engine Displacement: Bore: Stroke: Engine power to ISO 7293 Idle speed: Permissible max. speed with bar and chain: 30.1 cm³ 37 mm 28 mm 1.3 kW 3,000 rpm 13,500 rpm Sound pressure level Lpeq to ISO 228681) Sound power level Lpeq to ISO 228681) Vibration acceleration ahv,eq to ISO 228671) Left-hand handle Right-hand handle 97 dB(A) 109 dB(A) 2.9 m/s² 3.1 m/s² Weight (no fuel, without bar and chain): 3.0 kg 1) The idle, full-throttle and nominal maximum speed were equally used to calculate the sound and vibration. 2.2 Fuel System Carburetor Position-independent diaphragm carburetor with limiter cap on the main set screw and integrated fuel pump Standard limiter cap setting on the H-screw Low-speed screw L: High speed screw H: 1 turn open 3/4 turn open (max. to stop) Fuel capacity 0.27 l (270 cm³) 2.3 Ignition System Ignition module: Microprocessor- controlled with adjustment of the ignition timing Spark plug (suppressed): NGK BPMR 7 A Electrode gap: 0.5 mm 2.4 Chain Lubrication Oil pump: Oil tank capacity: Speed-dependent, fullyautomatic pump with rotary piston 0.22 l (220 cm³) 2.5 Recommended cutting attachments Only use low-kickback chains. Guide bar: Rollomatic with sprocket nose Bar lengths: 30, 35 and 40 cm Oilomatic saw chains: Picco-Micro Mini (PMN) Drive link thickness 1.1 mm Picco-Micro 1 (PM 1) Drive link thickness 1.3 mm Chain pitch: 9.32 mm (3/8'') Sprocket wheel: 6-tooth for 3/8" P (spur sprocket) Basic setting without limiter cap Low-speed screw L: High speed screw H: 1 turn open 1 turn open TI_02_2005_11_01_01.fm