Stihl MS 310 Product Instruction Manual - Page 37

as soon, as engine runs, immediately, immediately

Get Stihl MS 310 PDF manuals and user guides View all Stihl MS 310 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

English / USA STOP 0 6 4 5 143BA019 KN 143BA020 KN 209BA008 KN Alternative method of starting: : Hold the rear handle tightly between your legs, just above the knees. : Hold the front handle firmly with your left hand - your thumb should be under the handle. : Pull the starter grip slowly with your right hand until you feel it engage - and then give it a brisk strong pull and push down the front handle at the same time. Do not pull out starter rope to its full length - it might otherwise break. Do not let the starter grip snap back - guide it slowly and vertically into the housing so that the starter rope can rewind properly. If engine is new, pull starter grip several times to prime the fuel line. When engine begins to fire: : Press in decompression valve. : Move Master Control lever (4) to n and continue cranking - as soon as engine runs, immediately blip the throttle trigger (5) - the Master Control lever (4) will move to the "Run" position # (6) and the engine will settle down to idling speed. . As the chain brake is still engaged, the engine must be returned to idling speed immediately - or the engine and chain brake might otherwise be damaged. 36 MS 290, MS 310, MS 390

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
36
English / USA
MS 290, MS 310, MS 390
Alternative method of starting:
:
Hold the rear handle tightly between
your legs, just above the knees.
:
Hold the front handle firmly with
your left hand – your thumb should
be under the handle.
:
Pull the starter grip slowly with your
right hand until you feel it engage
–
and then give it a brisk strong pull
and push down the front handle at
the same time.
Do not pull out starter rope to its full
length –
it might otherwise break.
Do not let the starter grip snap back
– guide it slowly and vertically into
the housing so that the starter rope
can rewind properly.
If engine is new, pull starter grip several
times to prime the fuel line.
When engine begins to fire:
:
Press in decompression valve.
:
Move Master Control lever
(4)
to
n
and continue cranking –
as soon
as engine runs, immediately
blip
the throttle trigger
(5)
–
the Master Control lever
(4)
will
move to the “Run” position
#
(6)
and the engine will settle down to
idling speed.
.
As the chain brake is still engaged,
the engine must be returned to
idling speed
immediately
– or the
engine and chain brake might
otherwise be damaged.
143BA019 KN
143BA020 KN
4
5
6
0
STOP
209BA008 KN