Stihl MS 341 Instruction Manual - Page 49
Starter Grip without ElastoStart, Starter Grip with ElastoStart, All Versions
View all Stihl MS 341 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
213BA018 KN 213BA019 KN 213BA020 KN English / USA Starter Grip without ElastoStart : Use a screwdriver to pry the rope out of the starter grip. : Remove the remaining rope from the rotor and grip. Starter Grip with ElastoStart* : Use a screwdriver to pry the rope out of the starter grip. : Remove the remaining rope from the rotor and grip. All Versions : Thread the new rope through the starter grip and tie a simple overhand knot. : Pull the knot back into the grip. : Thread the new rope through the top of the starter grip. 5 6 7 : Thread the rope through the top of the guide bush (5), pull it through the rotor (6) and secure it with a simple overhand knot. : Coat rope rotor bearing bore with resin-free oil. : Slip rotor over the starter post (7) - turn it back and forth to engage anchor loop of the rewind spring. * see "Guide to Using this Manual" 48 MS 341, MS 361, MS 361 C