Stihl MS 341 Instruction Manual - Page 61
Specifications
View all Stihl MS 341 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
English / USA Specifications EPA / CEPA: The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category A = 300 hours B = 125 hours C = 50 hours CARB: The Emission Compliance Period used on the CARB Air Index Label indicates the terms: Extended = 300 hours Intermediate = 125 hours Moderate = 50 hours Engine STIHL single cylinder two-stroke engine Displacement MS 341 MS 361, MS 361 C Bore MS 341 MS 361, MS 361 C Stroke MS 341 MS 361, MS 361 C 3.6 cu.in (59 cm3) 3.6 cu.in (59 cm3) 1.85 in (47 mm) 1.85 in (47 mm) 1.34 in (34 mm) 1.34 in (34 mm) Idle speed 2800 rpm Maximum permissible engine speed with guide bar and chain MS 341: 13500 rpm MS 361: 14000 rpm Magneto ignition system Electronic (breakerless) Spark plug (resistor type) Bosch WSR 6 F, NGK BPMR 7 A Electrode gap 0.02 in (0.5 mm) Carburetor All position diaphragm carburetor with integral fuel pump Fuel capacity: 1.45 US pt (0.685 l) Chain lubrication Fully automatic speed-controlled rotary piston oil pump. Additional manual oil flow control. Oil tank capacity: 0.69 US pt (0.325 l) Weight (without bar and chain) MS 341 MS 361 MS 361 C MS 361 with handle heating 12.1 lbs (5.5 kg) 12.3 lbs (5.6 kg) 12.6 lbs (5.7 kg) 12.8 lbs (5.8 kg) Cutting Attachment Recommended cutting attachments for compliance with § 5.11 of ANSI standard B 175.1-2000 (see page 13 of this manual): STIHL reduced kickback bar (with green label) for 0.325" and 3/8" pitch: Rollomatic with sprocket nose 16, 18 or 20" (40, 45 or 50 cm) STIHL low kickback chain 1) (with green label) for .325" (8.25 mm) pitch: Rapid-Micro 2 (23 RM2, 26 RM2) Rapid-Micro C3 (23 RMC3, 26 RMC3) for 3/8" (9.32 mm) pitch: Rapid-Micro 2 (33 RM2, 36 RM2) Rapid-Super C3 (33 RSC3, 36 RSC3) Chain sprocket: 9-tooth for .325" pitch 7-tooth for 3/8" pitch 1) See definition of "low kickback chain" on page 16. 60 MS 341, MS 361, MS 361 C