Stihl MS 341 Instruction Manual - Page 62
Special Accessories, Ordering Spare Parts
View all Stihl MS 341 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Special Accessories English / USA Ordering Spare Parts In order to comply with the kickback performance requirements of § 5.11 of ANSI Standard B 175.1-2000, do not use replacement saw chain unless it has been designated as meeting the ANSI § 5.11 requirements on this specific powerhead or has been designated as "low kickback" saw chain 1) in accordance with the ANSI B 175.1-2000 standard. Since new bar/chain combinations may be developed after publication of this manual, ask your STIHL dealer for the latest STIHL recommendations. Other bars and chains available for this powerhead are: STIHL yellow-labeled bars: For .325" and 3/8" pitch Rollomatic "S" with sprocket nose 16, 18 or 20" (40, 45 or 50 cm) 24" (60 cm) only 3/8" pitch Duromatic with stellite tipped nose 16, 18 or 20" (40, 45 or 50 cm) 24" (60 cm) only 3/8" pitch STIHL yellow-labeled chains: For .325" pitch: Rapid Micro (23/26 RM, 23/26 RMC) Rapid Super (23/26 RS) For 3/8" pitch: Rapid Micro (33/36 RM), Rapid Super (33/36 RSC, 33/36 RSK) Contact your STIHL dealer for information regarding special accessories that may be available for your product. Please enter your saw model, serial number as well as the part numbers of the guide bar and saw chain in the spaces provided. This will make re-ordering simpler. The guide bar and saw chain are subject to normal wear and tear. When purchasing these parts, always quote the saw model, the part numbers and names of the parts. Model Serial number Guide bar part number Chain part number For recommended STIHL reduced kickback cutting attachments see section "Specifications" of this Owner's Manual. 1) See definition of "low kickback chain" on page 16. MS 341, MS 361, MS 361 C 61