Stihl MSA 160 C-BQ Product Instruction Manual - Page 25

English Description of Operation The power tool is operated with a rechargeable battery. Use only STIHL chargers to recharge the battery. Data exchange The power tool, battery and charger communicate with each other. The charger charges the battery and the battery supplies the necessary power only if data exchange functions properly. For this reason you should operate your power tool only with the approved STIHL batteries and STIHL chargers. Cutting Attachment STIHL is the only manufacturer in the industry to produce its own chain saws, guide bars, saw chains and chain sprockets. A cutting attachment consists of the saw chain, guide bar and chain sprocket. The cutting attachment that comes standard is designed to exactly match the chain saw. 1 2 Mounting the Bar and Chain (quick chain tensioner) Removing the chain sprocket cover N Set hand guard to ƒ N Remove the battery from the machine 1 3 2 3999BA001 KN 001BA191 KN a 3 t = a : 2 - The pitch (t) of the saw chain (1), chain sprocket and the nose sprocket of the Rollomatic guide bar must match. - The drive link gauge (2) of the saw chain (1) must match the groove width of the guide bar (3). If non-matching components are used, the cutting attachment may be damaged beyond repair after a short period of operation. N Swing grip (1) into position (until it engages) N Turn the wing nut (2) to the left until it hangs loosely in the chain sprocket cover (3) N Remove chain sprocket cover (3) Mounting the tensioning gear 1 3999BA029 KN MSA 160 C N Remove and reverse tensioning gear (1) 23