Stihl MSA 160 C-BQ Product Instruction Manual - Page 26
Releasing the chain brake, Fitting the saw chain
View all Stihl MSA 160 C-BQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English 2 Releasing the chain brake 2310BA015 KN N Remove screw (2) 1 3 N Pull hand guard towards the front handle until it engages audibly and the hand guard is in the position , - chain brake is released Fitting the saw chain 2310BA016 KN N Position tensioning gear (1) and guide bar (3) relative to one another 2 3999BA010 KN N Fit the saw chain - starting at the nose of the guide bar - pay attention to the position of the tensioning gear and the cutting edges N Turn tensioning gear (1) to the right as far as possible N Turn the guide bar so that the tensioning gear faces the user 3 2 N Place the saw chain on the chain sprocket (2) N Slide the guide bar over the collar screw (3); the head of the rear collar screw must protrude into the oblong hole 181BA013 KN 2310BA017 KN 3999BA004 KN N Insert and tighten screw (2) 24 1 Put on protective gloves - risk of injury by the sharp cutters 181BA012 KN N Guide the drive link into the bar groove (arrow) and turn the tensioning gear to the left as far as possible MSA 160 C