Stihl MSE 140 C-BQ Product Instruction Manual - Page 32
Connecting Saw, to Power Supply
View all Stihl MSE 140 C-BQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Connecting Saw to Power Supply English / USA Chain brake maintenance The chain brake is subject to normal wear. It is necessary to have it serviced and maintained regularly by trained personnel. STIHL recommends that you have the maintenance and repair work performed by a STIHL servicing dealer at the following intervals: Full-time professional users: Semi-professional users (farm and construction industry): Hobby and occasional users: every 3 months every 6 months every 12 months The voltage of your power supply and the voltage specified on the saw must be the same. Outdoor operation: Connect the saw via a ground-fault circuit breaker. Extension cords must be suitable for outdoor use. Mains power outlet: Must be equipped with a fuse or automatic circuit breaker. If the fuse or circuit breaker is tripped when you switch on the saw, use an extension cord (at least 35 ft /10 m long) that meets the specifications in the following table. Extension cords: Minimum wire size for extension cords for 120 Volt appliances: Cord types SJW-A or SJTW-A Round jacketed cords. MSE 140 cord length (ft) 50 100 150 wire size (AWG) 14 12 10 MSE 180 cord length (ft) 50 wire size (AWG) 10 100 150 1) 1) 1) not recommended Listed by UL, W-A marking on cable jacket indicates "use outdoors". Appropriate extension cords are available in stores spezializing in electrical equipment. Cable drum: Always unwind the cord completely. It should be equipped with thermal protection. MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C 31