Stihl MSE 140 C-BQ Product Instruction Manual - Page 45

English / USA Specifications MSE 140 C Voltage Frequency Rating Enclosure Insulation Amp rating MSE 180 C Voltage Frequency Rating Enclosure Insulation Amp rating 120 V 60 Hz 1.4 kW IP 20 II 15 A 120 V 60 Hz 1.8 kW IP 20 II 15 A Chain lubrication Fully automatic speed-controlled oil pump Oil tank capacity 6.8 oz (0.20 L) Weight without bar and chain MSE 140 C MSE 180 C 7.3 lbs (3.3 kg) 7.7 lbs (3.5 kg) Cutting Attachment Recommended cutting attachments for compliance with § 5.11 of ANSI standard B 175.1-2000 (see page 13 of this manual): Guide bar STIHL reduced kickback bar (with green label) for 3/8" P pitch: - Picco Micro Mini, groove width 0.04 in (1.1 mm) - Picco Micro, groove width 0.05 in (1.3 mm) Rollomatic with sprocket nose 12, 14 or 16 in (30, 35 or 40 cm) Oilomatic chain STIHL low kickback chain1) (with green label) for 3/8" P pitch: 3/8" (9.32 mm) Picco-Micro Mini (61 PMMC3, 61 PMN) 3/8" (9.32 mm) Picco-Micro (63 PMC3, 63 PM1) Spur sprocket: 7-tooth for 3/8" P pitch In order to comply with the kickback performance requirements of § 5.11 of ANSI standard B 175.1-2000, do not use replacement saw chain unless it has been designated as meeting the ANSI § 5.11 requirements on this specific powerhead, or has been designated as "low kickback" saw chain1) in accordance with the ANSI B 175.1-2000 standard. Since new bar/chain combinations may be developed after publication of this manual, ask your STIHL dealer for the latest recommendations. 1) See definition of "low kickback chain" on page 15 of this manual. 1) See definition of "low kickback chain" on page 15 of this manual. 44 MSE 140 C, MSE 160 C, MSE 180 C, MSE 200 C